@article {166, title = {Nanomechanical Investigations of Crystals of Copper Nanocluster Isomorphs: Enhanced Hardness of the Low-Density Analogue}, journal = {Chemistry of Materials}, year = {2025}, month = {01/2025}, type = {Full article}, abstract = {

Atomically precise cluster crystals, with constituent units composed of tens to hundreds of atoms, are important for the construction of miniaturized solid-state devices. Understanding the mechanical characteristics of such crystals is crucial for these applications. In this study, we focused on the nanomechanical properties of crystals of two isomorphic copper nanoclusters (Cu4L4), protected by ortho-carborane-9-thiol, Cu4(oCBT)4, and meta-carborane-9-thiol, Cu4(mCBT)4. These two clusters possess identical square planar Cu4 cores embedded in butterfly-shaped Cu4S4 staples. Load{\textendash}displacement measurements indicated that the crystals of Cu4(oCBT)4 (hardness of \~{}534.31 MPa) were harder than those of Cu4(mCBT)4 (hardness of \~{}335.49 MPa). Despite their lower density, crystals of Cu4(oCBT)4 demonstrated increased hardness, owing to the presence of locked slanted layers that efficiently interacted with each other through various short contact supramolecular interactions. During indentation studies, multiple {\textquotedblleft}pop-in{\textquotedblright} events were observed for the crystals of both clusters, suggesting the dislocation of molecular layers within the crystal lattice. Dynamic mechanical analysis conducted at different loading frequencies indicated that crystals of Cu4(oCBT)4 have a higher storage modulus than Cu4(mCBT)4. Both the crystals are thermally robust, as evident from thermogravimetric analysis and attenuated total reflection-IR analysis. Using density functional theory, we calculated Young{\textquoteright}s modulus (Er) for both crystals at 1 and 2\% strain and found that the high-density isomorph had a lower Er, consistent with experimental data showing Er of Cu4(oCBT)4 and Cu4(mCBT)4 to be 9.79 and 8.54 GPa, respectively. These findings highlight the significant role of subtle structural differences in governing the nanomechanical behavior of isomorphic cluster crystals, paving the way for their rational design in advanced solid-state device applications.

}, keywords = {carborane, Copper, indentation, nanocluster, nanomechanical, thiol, Young{\textquoteright}s modulus}, doi = {https://doi.org/10.1021/acs.chemmater.4c03265}, url = {https://pubs.acs.org/doi/10.1021/acs.chemmater.4c03265}, author = {Amoghavarsha R Kini and Sanghamitra Debta and Arijit Jana and C Aparna and Vivek Yadav and Nataliia Kusiak and Tomas Base and Umesh V Waghmare and Pijush Ghosh and Thalappil Pradeep} } @article {161, title = {Carborane-thiol protected copper nanoclusters: Stimuli-responsive materials with tunable phosphorescence}, journal = {Chemical Science}, volume = {14}, year = {2023}, month = {12/2023}, pages = {1613-1626}, type = {Article}, chapter = {1613}, abstract = {

Atomically precise nanomaterials with tunable solid-state luminescence attract global interest. In this work, we present a new class of thermally stable isostructural tetranuclear copper nanoclusters (NCs), shortly Cu4@oCBT, Cu4@mCBT and Cu4@ICBT, protected by nearly isomeric carborane thiols: ortho-carborane-9-thiol, meta-carborane-9-thiol and ortho-carborane 12-iodo 9-thiol, respectively. They have a square planar Cu4 core and a butterfly-shaped Cu4S4 staple, which is appended with four respective carboranes. For Cu4@ICBT, strain generated by the bulky iodine substituents on the carboranes makes the Cu4S4 staple flatter in comparison to other clusters. High-resolution electrospray ionization mass spectrometry (HR ESI-MS) and collision energy-dependent fragmentation, along with other spectroscopic and microscopic studies confirm their molecular structure. Although none of these clusters show any visible luminescence in solution, bright μs-long phosphorescence is observed in their crystalline forms. The Cu4@oCBT and Cu4@mCBT NCs are green emitting with quantum yields (Ф) of 81 and 59 \%, respectively, whereas Cu4@ICBT is orange emitting with a Φ of 18 \%. Density functional theory (DFT) calculations reveal the nature of their respective electronic transitions. The green luminescence of Cu4@oCBT and Cu4@mCBT clusters get shifted to yellow after mechanical grinding, but it is regenerated after exposure to solvent vapour, whereas the orange emission of Cu4@ICBT is not affected by mechanical grinding. Structurally flatten Cu4@ICBT didn{\textquoteright}t show mechonoresponsive luminescence in contrast to other clusters, having bent Cu4S4 structures. Cu4@oCBT and Cu4@mCBT are thermally stable up to 400 {\textdegree}C. The Cu4@oCBT retained green emission even upon heating to 200 {\textdegree}C under ambient conditions, while Cu4@mCBT changed from green to yellow in the same window. This is the first report on structurally flexible carborane thiol appended Cu4 NCs having stimuli-responsive tunable solid-state phosphorescence.

}, keywords = {boron, Cluster, Copper, Cu4L4, Phosphorescence, Responsive}, doi = {https://doi.org/10.1039/D2SC06578A}, url = {https://pubs.rsc.org/en/content/articlelanding/2023/sc/d2sc06578a}, author = {Arijit Jana and Madhuri Jash and Wakeel Ahmed Dar and Jayoti Roy and Papri Chakraborty and Paramasivam Ganesan and Sergei Lebedkin and Kaplan Kirakci and Sujan Manna and P. K. Sudhadevi Antharjanam and Jan Machacek and Monika Kucerakova and Sundargopal Ghosh and Kamil Lang and Manfred Kappes and Tomas Base and T. Pradeep} } @article {163, title = {Macropolyhedral syn-B18H22, the {\textquotedblleft}Forgotten{\textquotedblright} Isomer}, journal = {Journal of the American Chemical Society}, volume = {145}, year = {2023}, month = {August 2, 2023}, pages = {17975-17986}, chapter = {17975}, abstract = {

The chemistry and physics of macropolyhedral B18H22 clusters have attracted significant attention due to the interesting photophysical properties of anti-B18H22 (blue emission, laser properties) and related potential applications. We have focused our attention on the {\textquotedblleft}forgotten{\textquotedblright} syn-B18H22 isomer, which has received very little attention since its discovery compared to its anti-B18H22 isomer, presumably because numerous studies have reported this isomer as nonluminescent. In our study, we show that in crystalline form, syn-B18H22 exhibits blue fluorescence and becomes phosphorescent when substituted at various positions on the cluster, associated with peculiar microstructural-dependent effects. This work is a combined theoretical and experimental investigation that includes the synthesis, separation, structural characterization, and first elucidation of the photophysical properties of three different monothiol-substituted cluster isomers, [1-HS-syn-B18H21] 1, [3-HS-syn-B18H21] 3, and [4-HS-syn-B18H21] 4, of which isomers 1 and 4 have been proved to exist in two different polymorphic forms. All of these newly substituted macropolyhedral cluster derivatives (1, 3, and 4) have been fully characterized by NMR spectroscopy, mass spectrometry, single-crystal X-ray diffraction, IR spectroscopy, and luminescence spectroscopy. This study also presents the first report on the mechanochromic shift in the luminescence of a borane cluster and generally enriches the area of rather rare boron-based luminescent materials. In addition, we present the first results proving that they are useful constituents of carbon-free self-assembled monolayers.

}, keywords = {boron, boron hydride, Cluster, luminescence, macropolyhedral, NMR, PXRD, SAM, self-assembly, single crystal, solid state, syn-B18H22, XPS}, doi = {https://doi.org/10.1021/jacs.3c05530}, url = {https://pubs.acs.org/doi/10.1021/jacs.3c05530}, author = {Deepak Kumar Patel and B. S. Sooraj and Kaplan Kirakci and Jan Machacek and Monika Kucerakova and Jonathan Bould and Michal Dusek and Martha Frey and Christof Neumann and Sundargopal Ghosh and Andrey Turchanin and Thalappil Pradeep and Tomas Base} } @article {157, title = {Light-Activated Intercluster Conversion of an Atomically Precise Silver Nanocluster}, journal = {ACS Nano}, volume = {15}, year = {2021}, pages = {15781-15793}, type = {Full Article}, abstract = {

Noble metal nanoclusters protected with carboranes, a 12-vertex, nearly icosahedral boron{\textendash}carbon framework system, have received immense attention due to their different physicochemical properties. We have synthesized ortho-carborane-1,2-dithiol (CBDT) and triphenylphosphine (TPP) coprotected [Ag42(CBDT)15(TPP)4]2{\textendash} (shortly Ag42) using a ligand-exchange induced structural transformation reaction starting from [Ag18H16(TPP)10]2+ (shortly Ag18). The formation of Ag42 was confirmed using UV{\textendash}vis absorption spectroscopy, mass spectrometry, transmission electron microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, and multinuclear magnetic resonance spectroscopy. Multiple UV{\textendash}vis optical absorption features, which exhibit characteristic patterns, confirmed its molecular nature. Ag42 is the highest nuclearity silver nanocluster protected with carboranes reported so far. Although these clusters are thermally stable up to 200 {\textdegree}C in their solid state, light-irradiation of its solutions in dichloromethane results in its structural conversion to [Ag14(CBDT)6(TPP)6] (shortly Ag14). Single crystal X-ray diffraction of Ag14 exhibits Ag8{\textendash}Ag6 core{\textendash}shell structure of this nanocluster. Other spectroscopic and microscopic studies also confirm the formation of Ag14. Time-dependent mass spectrometry revealed that this light-activated intercluster conversion went through two sets of intermediate clusters. The first set of intermediates, [Ag37(CBDT)12(TPP)4]3{\textendash} and [Ag35(CBDT)8(TPP)4]2{\textendash} were formed after 8 h of light irradiation, and the second set comprised of [Ag30(CBDT)8(TPP)4]2{\textendash}, [Ag26(CBDT)11(TPP)4]2{\textendash}, and [Ag26(CBDT)7(TPP)7]2{\textendash} were formed after 16 h of irradiation. After 24 h, the conversion to Ag14 was complete. Density functional theory calculations reveal that the kernel-centered excited state molecular orbitals of Ag42 are responsible for light-activated transformation. Interestingly, Ag42 showed near-infrared emission at 980 nm (1.26 eV) with a lifetime of \>1.5 μs, indicating phosphorescence, while Ag14 shows red luminescence at 626 nm (1.98 eV) with a lifetime of 550 ps, indicating fluorescence. Femtosecond and nanosecond transient absorption showed the transitions between their electronic energy levels and associated carrier dynamics. Formation of the stable excited states of Ag42 is shown to be responsible for the core transformation.

}, keywords = {carboranes silver nanoclusters intercluster conversion near-infrared emission luminescence ultrafast electron dynamics}, doi = {https://doi.org/10.1021/acsnano.1c02602}, url = {https://pubs.acs.org/doi/abs/10.1021/acsnano.1c02602}, author = {Arijit Jana and Madhuri Jash and Ajay Kumar Poonia and Ganesan Paramasivam and Md Rabiul Islam and Papri Chakraborty and Sudhadevi Antharjanam and Jan Machacek and Sundargopal Ghosh and Kumaran Nair Valsala Devi Adarsh and Tomas Base and Thalappil Pradeep} } @article {155, title = {Influence of Terminal Carboxyl Group on Structure and Reactivity of Functionalized m-Carboranethiolate Self-Assembled Monolayers}, journal = {Chemistry of Materials}, volume = {32}, year = {2020}, month = {07/2020}, pages = {6800-6809}, type = {Article}, chapter = {6800}, abstract = {

The structure and function of self-assembled monolayers (SAMs) at the nanoscale are determined by the steric and electronic effects of their building blocks. Carboranethiol molecules form pristine monolayers that provide tunable two-dimensional systems to probe lateral and interfacial interactions. Additional ω-functionality, such as carboxyl groups, can be introduced to change the properties of the exposed surfaces. Here, two geometrically similar isomeric m-carborane analogs of m-mercaptobenzoic acid, 1 COOH-7-SH-1,7-C2B10H10 and racem-1-COOH-9-SH-1,7-C2B10H10, are characterized and their SAMs on Au{111} are examined. The latter isomer belongs to the rare group of chiral cage molecules and becomes, to our knowledge, the first example assembled on Au{111}. Although different in symmetry, molecules of both isomers assemble into similar hexagonal surface patterns. The nearest neighbor spacing of 8.4 {\textpm} 0.4 {\r A} is larger than that of non-carboxylated isomers, consistent with the increased steric demands of the carboxyl groups. Computational modeling reproduced this spacing and suggests a tilt relative to the surface normal. However, tilt domains are not observed experimentally, suggesting the presence of strong lateral interactions. Analyses of the influence of the functional groups through the pseudo-aromatic m carborane skeleton showed that the thiol group attached to either carbon or boron atoms increases the carboxyl group acidity in solution. In contrast, the acidity of the exposed carboxyl group in the SAMs decreases upon surface attachment; computational analyses suggest that the driving force of this shift is the dielectric of the environment in the monolayer as a result of confined intermolecular interactions, proximity to the Au surface, and partial desolvation.

}, keywords = {acidity, carborane, carboxyl, monolayer, SAM, self-assembly}, doi = {https://doi.org/10.1021/acs.chemmater.0c02722}, url = {https://pubs.acs.org/doi/10.1021/acs.chemmater.0c02722}, author = {Dominic P Goronzy and Jan Stanek and Erin Avery and Han Guo and Zdenek Bastl and Michal Dusek and Nathan M Gallup and Saliha Gun and Monika Kucerakova and Brian J Levandowski and Jan Machacek and Vaclav Sicha and John C Thomas and Adem Yavuz and K N Houk and M Fatih Danisman and Ersen Mete and Anastassia N Alexandrova and Tomas Base and Paul S Weiss} } @article {152, title = {Formation of Highly Ordered Terminal Alkyne Self-Assembled Monolayers on the Au{111} Surface through Substitution of 1-Decaboranethiolate}, journal = {J. Phys. Chem. C}, volume = {123}, year = {2019}, pages = {1348{\textendash}1353}, abstract = {

The reaction aimed at completing and closing the open cages of 1-decaboranethiol self-assembled monolayers (SAMs) on Au{111} with 4-phenyl-1-butyne results in highly ordered monolayers of 4-phenyl-1-butyne. The initially disordered 1-decaboranethiolate changed into ordered (√3{\texttimes}√3)R 30{\textdegree} lattices on Au{111} typical of alkyne SAMs, indicating the complete substitution of 1-decaboranethiolate moieties, as determined by nanoscale imaging with scanning tunneling microscopy and X-ray photoelectron spectroscopy. Vibrational spectroscopy results indicate that the process happens gradually and that alkynyl groups are not totally oxidized in the ordered 4-phenyl-1-butyne monolayer.

}, keywords = {alkyne, decaborane, gold, self-assembly, surface, thiol}, doi = {10.1021/acs.jpcc.8b11033}, url = {https://pubs.acs.org/doi/10.1021/acs.jpcc.8b11033}, author = {Shenkai Wang and Dominic P Goronzy and Thomas D Young and Natcha Wattanatorn and Logan Stewart and Tomas Base and Paul S Weiss} } @article {149, title = {Acid-Base Control of Valency within Carboranedithiol Self-Assembled Monolayers: Molecules Do the Can-Can}, journal = {ACS Nano}, volume = {12}, year = {2018}, month = {02/2018}, pages = {2211{\textendash}2221}, type = {Full paper}, chapter = {2211}, abstract = {

We use simple acid-base chemistry to control the valency in self-assembled monolayers of two different carboranedithiol isomers on Au{111}. Monolayer formation proceeds via Au-S bonding, where manipulation of pH prior to or during deposition enables the assembly of dithiolate species, monothiol/monothiolate species, or combination. Scanning tunneling microscopy (STM) images identify two distinct binding modes in each unmodified monolayer, where simultaneous spectroscopic imaging confirms different dipole offsets for each binding mode. Density functional theory calculations and STM image simulations yield detailed understanding of molecular chemisorption modes and their relation with the STM images, including inverted contrast with respect to the geometric differences found for one isomer. Deposition conditions are modified with controlled equivalents of either acid or base, where the coordination of the molecules in the monolayers is controlled by protonating or deprotonating the second thiol/thiolate on each molecule. This control can be exercised during deposition to change the valency of the molecules in the monolayers, a process that we affectionately refer to as the {\textquotedblleft}can-can.{\textquotedblright} This control enables us to vary the density of molecule-substrate bonds by a factor of two without changing the molecular density of the monolayer.

}, keywords = {carborane, dipoles, molecules switch, nanoscience, scanning tunneling microscopy, self-assembled monolayer, self-assembly, two dimensional}, doi = {10.1021/acsnano.7b09011}, url = {https://pubs.acs.org/doi/10.1021/acsnano.7b09011}, author = {John C Thomas and Dominic P. Goronzy and Andrew C Serino and Harsharn S Auluck and Olivia R Irving and Elisa Jimenez-Izal and Jacqueline M Deirmenjian and Jan Machacek and Philippe Sautet and Anastassia N Alexandrova and Tomas Base and Paul S Weiss} } @article {141, title = {Adsorption of oriented carborane dipoles on a silver surface}, journal = {Physica Status Solidi B}, volume = {253}, year = {2016}, month = {10 DEC 2015}, pages = {591-600}, abstract = {

Modification of surfaces with self-assembled mono-layers (SAMs) represents a powerful and innovative tool for adjusting physical and chemical properties of surfaces. The adsorption of isomeric molecules with relatively strong and oppositely oriented molecular dipoles, 1,2-(HS)2-1,2-C2B10H10 and 9,12-(HS)2-1,2-C2B10H10, on a flat silver surface is investigated in order to adjust its work function in a desired way. Time-offlight secondary ion mass spectroscopy (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS) are used to prove that both isomers (i) chemisorb on a silver surface as thiolates and (ii) exhibit comparable surface densities. Densely packed surfaces of both SAMs are additionally investigated by electrochemical impedance spectroscopy, and effective surface passivation is observed. Co-deposition of both derivatives is shown to enable effective and fine adjustment of the surface work function value within a range of 1V, which is confirmed by Kelvin probe force microscopy (KPFM). Experimental data indicate faster SAM formation for the former isomer. Contribution of the interface Ag{\textendash}S bonds to the work function changes is quantified.

}, keywords = {carborane, Kelvin probe force microscopy, self-assembled monolayers, silver, time-of-flight secondary ion mass spectrometry, X-ray photoelectron spectroscopy}, doi = {10.1002/pssb.201552446}, author = {Aliaksei Vetushka and Laetitia Bernard and Olga Guseva and Zdenek Bastl and Ji{\v r}{\'\i} Plocek and Ivo Tomandl and Antonin Fejfar and Tomas Base and Patrik Schmutz} } @article {118, title = {Tuning the surface potential of Ag surfaces by chemisorption of oppositely-oriented thiolated carborane dipoles}, journal = {Journal of Colloid and Interface Science}, volume = {354}, year = {2011}, chapter = {168}, abstract = {

Two selected carboranethiol isomers were used to modify flat silver surfaces. Both isomers, 1,2-(HS)2 }, doi = {10.1016/j.jcis.2010.10.052}, url = {http://www.sciencedirect.com/science/article/pii/S0021979710012385}, author = {Jorn F Lubben and Tomas Base and Patrick Rupper and Tina Kunniger and Jan Machacek and Sebastien Guimond} } @proceedings {134, title = {Carborane Thiol-modified Gold Surfaces. A Study and Comparison of Modified Cluster and Flat Surfaces}, journal = {12th International Meeting on Boron Chemistry (IMEBORON-XII)}, year = {2005}, address = {Sendai, Japan, 11 }, author = {Tomas Base and Zdenek Bastl and Zbynek Plzak and Tomas Grygar and Jaromir Plesek and Michael J Carr} } @article {115, title = {Carboranethiol-Modified Gold Surfaces. A Study and Comparison of Modified Cluster and Flat Surfaces}, journal = {Langmuir}, volume = {21}, year = {2005}, chapter = {7776}, abstract = {

Four different carboranethiol derivatives were used to modify the surfaces of gold nanoparticles and flat gold films. The novel materials engendered from these modifications are extraordinarily stable species with surfaces that support self-assembled monolayers of 1-(HS)-1,2-C2B10H11, 1,2-(HS)2-1,2-C2B10H10, 1,12-(HS)2-1,12-C2B10H10, and 9,12-(HS)2-1,2-C2B10H10, respectively. Surprisingly, characterization of these materials revealed that a number of molecules of the carboranethiol derivatives are incorporated inside the nanoparticles. This structural feature was studied using a number of techniques, including X-ray photoelectron spectroscopy (XPS), UV }, doi = {10.1021/la051122d}, url = {http://pubs.acs.org/doi/abs/10.1021/la051122d}, author = {Tomas Base and Zdenek Bastl and Zbynek Plzak and Tomas Grygar and Jaromir Plesek and Michael J Carr and Vaclav Malina and Jan Subrt and Jaroslav Bohacek and Eva Vecernikova and Otomar Kriz} } @article {160, title = {Carborane-thiol protected copper nanoclusters: Stimuli-responsive materials with tunable phosphorescence }, journal = {Chemical Science}, abstract = {

Atomically precise nanomaterials with tunable solid-state luminescence attract global interest. In this work, we present a new class of thermally stable isostructural tetranuclear copper nanoclusters (NCs), shortly Cu4@oCBT, Cu4@mCBT and Cu4@ICBT, protected by nearly isomeric carborane thiols: ortho-carborane-9-thiol, meta-carborane-9-thiol and ortho-carborane 12-iodo 9-thiol, respectively. They have a square planar Cu4 core and a butterfly-shaped Cu4S4 staple, which is appended with four respective carboranes. For Cu4@ICBT, strain generated by the bulky iodine substituents on the carboranes makes the Cu4S4 staple flatter in comparison to other clusters. High-resolution electrospray ionization mass spectrometry (HR ESI-MS) and collision energy-dependent fragmentation, along with other spectroscopic and microscopic studies confirm their molecular structure. Although none of these clusters show any visible luminescence in solution, bright μs-long phosphorescence is observed in their crystalline forms. The Cu4@oCBT and Cu4@mCBT NCs are green emitting with quantum yields (Ф) of 81 and 59 \%, respectively, whereas Cu4@ICBT is orange emitting with a Φ of 18 \%. Density functional theory (DFT) calculations reveal the nature of their respective electronic transitions. The green luminescence of Cu4@oCBT and Cu4@mCBT clusters get shifted to yellow after mechanical grinding, but it is regenerated after exposure to solvent vapour, whereas the orange emission of Cu4@ICBT is not affected by mechanical grinding. Structurally flatten Cu4@ICBT didn{\textquoteright}t show mechonoresponsive luminescence in contrast to other clusters, having bent Cu4S4 structures. Cu4@oCBT and Cu4@mCBT are thermally stable up to 400 {\textdegree}C. The Cu4@oCBT retained green emission even upon heating to 200 {\textdegree}C under ambient conditions, while Cu4@mCBT changed from green to yellow in the same window. This is the first report on structurally flexible carborane thiol appended Cu4 NCs having stimuli-responsive tunable solid-state phosphorescence.

}, keywords = {boron, carborane, Cluster, Copper, Phosphorescence, Responsive, thiol}, doi = {https://doi.org/10.1039/D2SC06578A}, url = {https://pubs.rsc.org/en/content/articlelanding/2023/sc/d2sc06578a}, author = {Arijit Jana and Madhuri Jash and Wakeel A Dar and Jayoti Roy and Papri Chakraborty and Paramasivam Ganesan and Sergei Lebedkin and Kaplan Kirakci and Sujan Manna and P. K. Sudhadevi Antharjanam and Jan Machacek and Monika Kucerakova and Sundargopal Ghosh and Kamil Lang and Manfred Kappes and Tomas Base and T. Pradeep} }